Rk3326 Firmware -

This is written as a technical reference piece suitable for developers, advanced hobbyists, or device maintainers. 1. Overview The Rockchip RK3326 is a low-power, quad-core ARM Cortex-A35 application processor designed for entry-level tablets, educational devices, retro gaming handhelds (e.g., Anbernic RG351 series), and smart displays.

| Component | File name (typical) | Description | |---------------|---------------------|-------------------------------------------| | Loader | rk3326_loader.bin | First-stage bootloader (DDR init, USB download) | | Parameter | parameter.txt | Partition table & kernel bootargs | | U-Boot | uboot.img | Second-stage bootloader | | Trust OS | trust.img | ARM TrustZone (OP‑TEE) | | Kernel | boot.img | Linux zImage + DTB | | Rootfs | rootfs.img | SquashFS, ext4, or f2fs image | | Misc / Recovery | recovery.img | Optional recovery environment | Do not use generic “RK3326 firmware” search results. Always obtain firmware for your exact device model. Rk3326 Firmware

Firmware for RK3326 devices is – it is highly board‑specific. Flashing the wrong firmware will brick the device. This is written as a technical reference piece

| Source type | Examples / Links | |----------------------------|----------------------------------------------------------------------------------| | Vendor / OEM | Manufacturer’s support page (e.g. Powkiddy, Anbernic, Firefly) | | Rockchip reference (BSP) | Rockchip Linux BSP (public, but board‑specific configs needed) | | Community maintained | Chocolatey’s rk3326-dev | | Device-specific firmware | Anbernic RG351P firmware (custom Linux) | ⚠️ Rockchip does release generic “RK3326 firmware”. You must build or obtain one for your PCB. 4. Building from Source (Linux) 4.1 Prerequisites sudo apt install git-core repo gcc-arm-linux-gnueabihf device-tree-compiler \ libssl-dev bc bison flex libncurses5-dev u-boot-tools 4.2 Clone Rockchip BSP mkdir rk3326-bsp && cd rk3326-bsp repo init -u https://github.com/rockchip-linux/manifests -b master -m rk3326_linux.xml repo sync 4.3 Build U-Boot cd u-boot make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- rk3326_defconfig make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j4 # Output: uboot.img, rk3326_loader.bin 4.4 Build Kernel cd ../kernel make ARCH=arm rockchip_linux_defconfig make ARCH=arm rk3326-xxx-board.dtb # replace xxx-board with your device make ARCH=arm -j4 4.5 Create Rootfs (Buildroot example) cd ../buildroot make rockchip_rk3326_defconfig make -j4 # Output: rootfs.ext2 or rootfs.squashfs 4.6 Pack Firmware (using rockchip-mkbootimg & rkImageMaker ) Assemble into a single flashable image – refer to Rockchip’s mkupdate.sh script. 5. Flashing Methods 5.1 Enter Mask ROM / Loader Mode | Method | Action | |--------------------------------|------------------------------------------------------------------------| | Button combo (gaming device) | Hold Volume+ or F while connecting USB | | Short test points (brick recovery) | Short CLK‑GND on NAND/eMMC while powering on | | SD card boot | Write rk3326_loader.bin + parameter.txt + images to SD card | | Component | File name (typical) | Description

Check connection:

| Feature | Detail | |----------------------|--------------------------------------| | CPU | Quad-core Cortex-A35 @ 1.5 GHz | | GPU | Mali-G31 MP2 | | Typical OS | Linux (Buildroot, Yocto) or Android 10 | | Boot flow | Mask ROM → U-Boot → Kernel → Rootfs | | Storage | eMMC, NAND, or SD card | A full RK3326 firmware package ( .img or update package) contains: